LG LE4016D-NH Manual do Utilizador descarregar pdf (Página 60)

LG Network Client Program

Mail

1. Click the [Setup] button.

2. Set the below options.

• Notication: Marks up to notify the unit operating

information according to notication settings by e-mail.

If notication option is not set, the other options cannot be

set.

- SMTP Server: Enter the SMTP Server address.

- SMTP Port: Enter the SMTP Port Number. Typically the

port used for SMTP is 25. However in some cases it is

better to change this port number for added exibility

or security. You can edit this port between 1 and 65 535.

- User Name: Enter the user name.

- Password: Enter the password.

• TLS: Marks up when using the TLS (Transport Layer Security)

function.

- Mail Address (1 to 3): Enter the mail address.

You can input up to 3 e-mail addresses.

NOTE

The SMTP Server, SMTP Port, user name or password settings are

optional. The DVR can send e-mail directly without the use of an

SMTP server or MTA (message transfer agent). In certain cases all

e-mail should be forwarded to a specic SMTP server. Specify the

server host name or IP address in such a case. For more detail on

SMTP setup, ask your network administrator and/or mail service

provider.

3. Click the [OK] button to conrm the settings.

Notication

Marks up when you want to activate the selected option. If the

selected notication option is activate, notify the user about the

information of selected option by E-mail.

• Sensor On: Sends an e-mail when a sensor has occurred.

• Motion Detection: Sends an e-mail when an motion detection

has occurred.

• Text In: Sends an E-mail when the text input is detected.

• Admin PW Changed: Sends an e-mail when the administrator

password has changed.

• Video Loss: Sends an e-mail when a video signal from the

camera has stopped because of a cable disconnection or

malfunction of a camera.

• Power On/O: Sends an e-mail when power is on or o.

• Disk Full: Sends an e-mail when the HDD has fully recorded.

Buzzer

Marks up when you want to activate the selected option.

• Sensor: Makes a sound when a sensor occurs.

• Motion : Makes a sound when a motion is detected.

• Text: Makes a sound when the DVR detects text input .

• System: Makes a sound when a cooling fan is not activated or

the HDD has bad sector.

Emergency

1. Click the [Setup] button.

2. Set the below options.

• Notication: Marks up to notify the emergency agent about

unit operating information according to your notication

settings.

• Host Name/Port: Enter the Host Name and port number of

the emergency agent program. The factory default port for

this function is 9002. However in some cases it is better to

change this port number for added exibility or security.

You can edit this port between 1 025 and 65 535.

You can set up to 9 Host Name and port numbers.

3. Click the [OK] button to conrm the settings.

Output

• Relay O

- Alarm Acknowledged: Use the ALM.OFF button to stop

alarm.

- Post Alarm Time: The alarm is stopped after post-alarm time.

• System Alarm Out: Outputs the alarm (relay) signal via the

selected alarm out terminal number below cases. If you do not

use this function, select [None] option.

- When the HDD has a bad sector.

- When a video signal from the camera has stopped because

of a cable disconnection or malfunction of a camera.

User Settings

Group Authority

You can register a new user group with various access rights.

• Group ID: Select the group ID to assign authority.

- Guest: The GUEST group has the limited authority of the

system. Users in this group are available to see the live

image and to set the covert function of the Main or Spot

channel.

- Administrator: The ADMINISTRATOR group has the unlimited

authority of the system. Users in this group are available to

use all of the functions.

- [Group 01] to [Group 08]: Users in this group are available to

set the authority of the function manually.

NOTE

The GUEST and ADMINISTRATOR group are set initially for the

authority of all functions. You cannot change the initial settings

and group name (GUEST and ADMINISTRATOR).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 83 84

Comentários a estes Manuais

Sem comentários

LG LE4016D-NH Manual do Utilizador Página 60

Comentários a estes Manuais