LG LE4016D-NH Manual do Utilizador descarregar pdf (Página 17)

Installation

Connecting LKD1000 controller

Connecting the LKD1000 controller to control the DVR. (Refer to the

manuals of the LKD1000 controller for more details.). The LKD1000

controller have to be connected to the 2 (DATA 2) port as shown

illustration. If you connect the LKD1000 controller to the 1 (DATA 1)

port, the LKD1000 controller will not be activated.

LKD1000 controller connection

TX+TX-

NOTE

Do not connect a PTZ camera and LKD1000 controller at the same

time to the D1 or D2 port. It may cause a malfunction.

Connecting Alarm Input and Alarm

Output

Alarm terminals are used to connect the alarm devices such as

sensors, door switches, etc.

Alarm Input

You can connect up to 16 alarm sensors (LE5008/LE4008: 8 alarm

sensors). Each alarm sensor should be connected with G (GND).

The signal state is adjustable to N/O (Normal Open) or N/C (Normal

Close) through the setup menu.

Sensor input connection

Terminal No. Description

1 Sensor Input 1

2 Sensor Input 2

3 Sensor Input 3

4 Sensor Input 4

G Ground

5 Sensor Input 5

6 Sensor Input 6

7 Sensor Input 7

8 Sensor Input 8

G Ground

9 Sensor Input 9

10 Sensor Input 10

11 Sensor Input 11

12 Sensor Input 12

G Ground

13 Sensor Input 13

14 Sensor Input 14

15 Sensor Input 15

16 Sensor Input 16

G Ground

LKD1000 Controller

Alarm sensor Alarm sensor

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 83 84

Comentários a estes Manuais

Sem comentários

LG LE4016D-NH Manual do Utilizador Página 17

Comentários a estes Manuais