LG LE4016D-NH Manual do Utilizador descarregar pdf (Página 58)

LG Network Client Program

Motion Settings

• Sensitivity: Set the sensitivity level for the created motion

detection area.

• Relay Output: Select the number of the RELAY-OUT terminal for

the output alarm (relay) signal when motion is detected.

• Area: The factory default of the Motion detection area is set as

the whole area. You can change the area by using mouse on the

preview window screen.

- Select area: Click one point with the left mouse button and

drag & drop to the end point.

- Clear area : Click the start point with the right mouse button

and drag & drop to the end point.

NOTE

• If you want to display the grid, mark up the [Show Grid]

option.

• If you want to select the entire area, click the [Set All] button

or click the [Clear All] button to cancel the selected area.

Sequence

View all the channels in sequence in the selected screen division

mode. You cannot use sequence mode with the 16 split (LE5008/

LE4008 series: 8 split). While the sequence mode condition, if you

change the screen division mode, the sequence function will be

canceled.

• Main Dwell Time: Selects the channel sequence time for main

monitor.

• Spot Dwell Time: Selects the channel sequence time for spot

monitor.

OSD

• Channel Name: Mark up to displays or removes the channel

name in the channel window.

• Channel Status: Mark up to displays or removes the channel

status in the channel window.

Record settings

1. Select a day of the week.

2. Mark up the desired recording option.

• N : No schedule recording.

• C (Continuous recording): Recording starts automatically

from the preset time.

• S (Sensor event recording): Recording starts automatically

when the sensor alarm is occurs within a designated time.

• M (Motion event recording): Recording starts automatically

when motion is detected within a designated time.

• T (Text event recording): Recording starts automatically

when text input is detected within a designated time.

• S+M (Sensor+Motion recording): Recording starts

automatically when the sensor alarm signal has input or

motion has been detected.

• C+S (Continuous+Sensor event recording): Recording starts

automatically from the preset time. When the sensor alarm

occurs within a designated time, change the continuous

recording mode to sensor event recording mode and

recording starts automatically.

• C+M (Continuous+Motion event recording): Recording

starts automatically from the preset time. When the

motion is detected within a designated time, change the

continuous recording mode to motion event recording

mode and recording starts automatically.

• C+T (Continuous+Text event recording): Recording starts

automatically from the preset time. When the text input

occurs within a designated time, change the continuous

recording mode to text event recording mode and

recording starts automatically.

• C+S+M (Continuous+Sensor+Motion event recording):

Recording starts automatically from the preset time.

When the sensor alarm signal has input or motion has

been detected, change the continuous recording mode

to motion event recording mode and recording starts

automatically.

• S+M+T (Sensor+Motion+Text event recording): When

the sensor alarm signal has input, motion has been

detected or the text input occurs and then recording starts

automatically.

• C+S+M+T (Continuous+Sensor+Motion+Text event

recording): Recording starts automatically from the preset

time. When the sensor alarm signal has input, motion has

been detected or the text input occurs within a designated

time, change the continuous recording mode to occurred

event recording mode and recording starts automatically.

3. Select the desired channel to schedule recording.

4. Click the start time cell block and drag & drop to select a time

period cell block.

Click the start time cell block of a channel and drag & drop

across the channels to select the time period block for multi-

channel setting at the same time. The color of the cell blocks

will change.

Schedule day copy settings

1. Select the source day to copy.

2. Click the [Schedule Copy] button to display the schedule copy

setup window.

3. Select the destination day from the day of the week, weekday or

weekend options.

4. Click the [Copy] button on the Day Copy option to copy the

scheduled data of the day.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 83 84

Comentários a estes Manuais

Sem comentários

LG LE4016D-NH Manual do Utilizador Página 58

Comentários a estes Manuais