Lg LS42F Manual do Utilizador descarregar pdf (Página 86)

FWD-S42H1/FWD-S47H1

4-111-559-01(1)

No sound/Noisy sound.

Picture displayed, no sound.

• Check the volume control.

• Press on the remote control or + so that Muting disappears

from the screen (page 14).

• Check “Speaker Out” settings (page 30).

Remote control does not operate.

• Check the polarity of the batteries or replace the batteries.

• Point the remote control at the remote control sensor of the display.

• Keep the remote control sensor area clear from obstacles.

• Check “Control Setting” (page 30).

• Check whether a cable is connected to the CONTROL S IN

connector (BKM-FW21 not supplied). The remote control cannot be

used while the display is controlled via a CONTROL S connection.

• Fluorescent lamps can interfere with remote control operation; try

turning off the fluorescent lamps.

Cannot connect to the network.

• Plug the cable firmly into the REMOTE connector.

• Check the network settings of the PC.

• Reset to the default settings by assigning the “All Reset” setting on

the “Setup” setting menu, and then assign the appropriate settings of

the network again.

• Check the settings in “Network Port.” (page 32)

The display control screen (the

Web screen displaying the

display’s GUI) does not appear.

• Click the refresh or reload button on your Web browser.

• Make sure the IP address is correct.

• Use Internet Explorer 6.0 or later.

• Clear the browser cache.

Problem Possible Remedies

010COV.book Page 40 Friday, June 27, 2008 7:25 AM

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 301 302

Sem comentários

Lg LS42F Manual do Utilizador Página 86