LG SC200 Manual do Utilizador descarregar pdf (Página 14)

FIXING THE ANCHORS AND SCREWS

Fixing the anchors and screws

CAUTION

Check the wall material and thickness of the finish material.

You can use the included anchors and screws with the

screen

for walls made of

concrete, lightweight concrete, soft fieldstone, hard fieldstone, brick, or hollow blocks.

If you want to install the product on another type of wall not previously listed, make

sure the wall can withstand a load of 686 N (70 kgf) per part and a shear load of

980 N (100 kgf) or more.

(Layer reinforcing materials such as plywood over the wall and then install the

product on top.)

a. Drill a hole with a diameter of 80-100 mm where the anchor will be attached to using

an 8 mm drill bit.

b. Clean out the drilled hole.

c. Insert the enclosed anchor into the hole. (Use a hammer when inserting the anchor.)

d. Insert the component into the hole and tighten it.

Tighten the screw using a recommended torque of 45 - 60 kgf/cm or more.

Anchor

Ring and steel spacer attaching screw

Drilling

Hole cleaning

Anchor insertion

Attaching ring and steel spacer

1 2 ... 9 10 11 12 13 14 15 16

Sem comentários

LG SC200 Manual do Utilizador Página 14