
4
ENG
Battery status High Medium Low
LED display Solid blue for 1 second Solid violet for 1 second Solid red for 1 second
How to use
Controls
Power on / Power off
- Move the power switch to the 'ON' or 'OFF' side.
Volume Control
- Briefly press the VOLUME button.
Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid red light.
- When charging is complete, the LED indicator will turn off.
Battery status check
- Press and hold the VOLUME DOWN button for 3 seconds.
- There are 3 levels of battery status
Low battery
- An announcement will be made once every 30 seconds.
- If the battery is not charged, the headset will turn off.
Answering a call / Ending a call
- Briefly press the CALL button.
Last number redial*
- Press and hold the CALL button for 1 second to activate “Last Number Redial”.
The headset will beep, and call the last number dialed.
Making a call
- If you make a call from the handset, the call will (subject to phone settings) automatically
transfer to the headset. If the call is not automatically transferred, you can manually
transfer the call by press and hold VOLUME UP button for 3 seconds.
Voice dialing*
- Briefly press the CALL button to activate “Voice Command”.
Note: If the handset does not support Voice Dialing, it is possible that performing this action
will activate Last Number Redial.
Transferring a call*
- While on a call on your handset, press and hold VOLUME UP button for 3 seconds to
transfer the audio either from headset to handset or from handset to headset.
Call waiting*
- Answer a second call without hanging up the first call by pressing the CALL button for 1
second (you will hear a beep). Press the CALL button for 1second to turn to the
original call.
- Briefly press the CALL button to terminate the active call or both calls at once. (subject
to handset's support)
Comentários a estes Manuais