
29Installation
3
Installation
4. Use
U
/
u
/
I
/
i
to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set the [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using
U
/
u
/
I
/
i
and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
5. Select [OK] and press ENTER ( ) to apply
network settings.
6. The player will ask you to test the network
connection. Select [OK] and press ENTER
(
) to complete the network connection.
7. If you select [Test] and press ENTER
( ) at step 6 above, the network
connection status is displayed on the
screen.
You can also test it on the
[Connection Status] in the [Setup] menu.
Wireless Network Connection
Another connection option is to use an Access
Point or a wireless router. In the example
con guration for wireless connection below,
this player would be able to access content
from either of the PCs.
The network con guration and connection
method may vary depending on the
equipment in use and the network
environment.
This player is equipped with an IEEE 802.11n
(2.4 GHz band only) wireless module, which
also supports the 802.11b/g standards. For the
best wireless performance, we recommend
using a IEEE 802.11n (2.4 GHz band only)
certi ed Wi-Fi network (access point or wireless
router).
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
HB965TZW-AF.BSGPLL_ENG_0845.indd29 29HB965TZW-AF.BSGPLL_ENG_0845.indd29 29 2010.4.19 2:22:31 PM2010.4.19 2:22:31 PM
Comentários a estes Manuais