LG LNB5110 Manual do Utilizador descarregar pdf (Página 20)

20 Operation and settings

Network settings

Basic

General

> MAC address: Displays the MAC address.

Port & Encryption

> Network encryption: Select the HTTP or HTTPS option for

security.

> Smart Port Setting: Select [On] to allocate a port number

automatically.

Note:

If you select [On], [UPNP Status], [External IP], [Web Port] and

[RTSP Port] options are deactivated.

> UPNP Status: When you use the router that is supported

UPNP function, you can set the port forwarding

automatically by using the [Smart Port Setting]. [UPNP

Status] shows connected status of router.

> External IP: When you connect the router that is supported

UPNP function, this option is displayed. Displays the external

IP address allocated router.

> Web port: The default HTTP port number (80) can be changed

to any port within the range 1 025 to 65 535.

> RTSP port: Check RTSP port. The default port is 554. Other

ports can be selected within the range 1 025 to 65 535.

Note:

The RTSP port number should not be same with the web

port number.

ARP ping

> Enable ARP ping to configure IP address: Check to enable

ARP ping.

• Save: Click this button to confirm the settings.

RTP stream

RTP (Real-time Transport Protocol) is an internet protocol that allows

programs to manage the real-time transmission of multimedia data,

via unicast or multicast.

Profile

> RTP unicast: When enabled the transmission of the data to

the specified equipment happens on a network specifying a

single address.

> RTP multicast: When enabled it reduces the transmission

load on the camera by making the computer of the same

segment network receive the same transmission data. When

multicast option is checked then select Video Port number,

Audio Port number and Data port number.

- IPv4 address: Set the IP address for RTP multicast.

- Base RTP port: Enter the port number of even number

used for the multicast streaming. Each profile uses

successive 6 port number which starts from [Base RTP

port]. It is initially set to 10 000 and you can edit this

between 10 000 and 65 530.

> Motion-Control FPS: If there is movement, the Framerate is

adjusted automatically.

Note:

• Video codec settings should be set to H.264 or H.264_HIGH to

operate the Motion-Control FPS.

• Each profile using multicast needs its own multicast IP address

and port numbers to avoid address conflict. When more than

2 profiles use same multicast IP address, each [Base RTP port]

number should be distinguished from the other port number

more than 6 at least.

Multicast

> Always Multicast: Check to enable multicast regardless of

client connection.

TTL

> TTL: This option indicates the Time-To-Live of multicast

packets. The default setting is 7, and the allowed TTL range

is from 1 to 255.

IP Fragmentation

> IP Fragmentation: Check to enable IP fragmentation.

When the VMS is not supported the IP Fragmentation,

uncheck this feature.

• Save: Click this button to confirm the settings.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 37 38

Comentários a estes Manuais

Sem comentários

LG LNB5110 Manual do Utilizador Página 20

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança LG LNB5110