DirectCD
TM
v2.5b(s)
Installation
8
PC Connection
To Install as a
Master Drive
The CD-RW/DVD-ROM drive connects to the motherboard of the host
computer using an IDE interface cable.You may connect the CD-RW/DVD-
ROM Drive as a Slave or Master device, depending on your computer.
NOTE : A hard disk is normally installed as the Primary Master on the
EIDE (ATAPI) interface. Other EIDE peripheral devices such as hard
drives and CD-RW/DVD-ROMs are then set differently.
To install the drive as a Master, the jumper can be left as supplied from
the factory.
Comentários a estes Manuais