Lg DLG2302W Manual do Utilizador descarregar pdf (Página 15)

Routing and Connecting Ductwork

Follow the guidelines below to maximize drying

performance and reduce lint buildup and

condensation in the ductwork.

NOTE: Ductwork and fittings are NOT included

and must be purchased separately.

•Use4-in.(10cm)diameterrigidorsemirigid

metal ductwork.

•Theexhaustductrunshouldbeasshortas

possible.

•Useasfewelbowjointsaspossible.

•Themaleendofeachsectionofexhaustduct

must point away from the dryer.

•Useducttapeonallductjoints.

•Insulateductworkthatrunsthroughunheated

areas in order to reduce condensation and lint

buildup on duct surfaces.

IMPORTANT: Failure to exhaust the dryer

correctly will void the dryer's warranty.

VENTING THE DRYER (cont.)

Correct Venting

Incorrect Venting

NOTE: Deduct 6 ft. (1.8 m) for each additional elbow. It is not recommended to use more than four 90° elbows.

65 ft. (19.8 m)

55 ft. (16.8 m)

47 ft. (13.7 m)

36 ft. (11.0 m)

28 ft. (8.5 m)

55 ft. (16.8 m)

47 ft. (13.7 m)

41 ft. (12.5 m)

30 ft. (9.1 m)

22 ft. (6.7 m)

Ductwork

(10.2 cm)

Recommended

/2"

(6.35 cm)

Use Only for Short

Run Installations

Wall Cap Type

Number of 90° Elbows

Max. Length of 4-In. Dia.

Rigid Metal Duct

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 123 124

Comentários a estes Manuais

Sem comentários

Lg DLG2302W Manual do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Para a casa Lg DLG2302W